Daily maintenance of automatic spray painting machine

1. 1. per class: a) with washing gun water washing line, paint machine, spray gun until clean without residue.

          b) Remove the spray gun spray cap and nozzle, and soak it in water for washing.

1. 2. Daily: a) the whole machine cleaning, in particular, spray paint, paint machine, spray room, waste gas treatment tower, up and down material table to clean up, wipe clean.

1. 3. Weekly: a) adjust the rotation belt tightness, check its wear condition, if the red wear layer of serious wear or tear off should be replaced in a timely manner.

          b) Check the adequacy of the lubricating oil of the automatic filling cup in order to replenish.

          c) Unscrew the electrostatic gun nozzle the dust cleaning net, and clearing vent.

          d) Spray room exhaust fan small cleaning: open the fan cleaning door, knock on the paint slag clean.

1. 4. Each month: a) the transmission chain and lubricating oil.

          b) The whole machine will be a tool bar, remove the retaining paint clean.

          c) Spray gun action piston with lubricating oil.

          d) Big fan: clean the wheel out clean paint slag, and the inner wall of the wind wheel and the volute butter to prevent contaminated paint.

          e) Spray water curtain, water tank and a water outlet hole tube clean.

          f) Exhaust duct cleaning

          g) Send air filter cotton replacement.

          h) Waste gas treatment tower wet filter Lian replacement.

          i) Waste gas treatment tower sprayer, spiral vortex spray pipe, the inner wall of the tower, the sewage funnel clean.

1. 5. Every year: a) will be the transmission reducer gear oil replacement gear box.

2.Security matters

1. 1) Because the device is a mechanical movement, so as long as the equipment is energized, and you don't take care of clothes for equipment running device into or hanging injury.

2. 2) Spray room work, it is strictly prohibited to open the door or the door to clean the door, so as not to cause injury to the adult.

3. 3) Equipment placement area should keep the air circulation and dry environment, it is strictly prohibited in the equipment and its working area stacked debris cause blockage, so as not to cause mechanical accident.

4. 4) Because the equipment is a machine in motion, so you must be in use and maintenance of the full protection and self-protection, we have no responsibility for any safety problems caused by this device.

5. 5) Equipment for the spraying machine in order to make more efficient products to improve the yield, please keep the equipment in a timely manner to clean up the environmental sanitation, is strictly prohibited to deposit paint on the equipment.

6. 6) The electric box must maintain good ventilation environment and is strictly prohibited in the electric box debris piled up, dust to regularly clean up the electric box, to avoid the occurrence of fire, which directly or indirectly caused by injury or other property loss of the company does not undertake any responsibility.